Configuration of Tera Term †Start up Tera Term †This page explains how to connect to server via port forwarding with Tera Term. Please execute Tera Term. Click cancel button if the system requires hostname to be connected. Next, select SSHForwarding in the Setup field of menubar. Configuration of port forwarding †Click Add button of dialog window for port forwarding. Input the following information
Click OK button twice to quit the setup after the input. Next, input the following URL at your web browser. http://localhost:9000 If you can see the top page of the server machine, configuration of the port forwarding has succeeded. Confirmation on SIGVerse †Click 'Edit' button of the SSH Forwarding in Setup menu. Change the port number 80 to destination port you will use at the SIGVerse server. In this case, 9001 is chosen. (You can check unused port number with netstat -an) Save configuration with 'Save setup...' in Setup menu to avoid input of the same information in the next time. Next, login to the SIGVerse server with Tera Term, select File menu->New connection, input the destination port number (ex.9001), then execute SIGVerse server ./sigserver.sh -p 9001 Execute SIGViewer, input localhost at the 'server host name' field in 'connection' frame in 'comm' tab, then input the local port number which you chose before. Finally, click the 'Connect to SimServer' to confirm that the SIGViewer is connected to the SIGVerse server. |