Backup of Installation(No. 2)

List of Backups
View the diff.
View the diff current.
View the source.
Go to Installation.
- 1 (2017-07-20 (Thu) 11:53:11)
- 2 (2017-07-20 (Thu) 13:19:02)
- 3 (2017-07-27 (Thu) 08:24:10)
- 4 (2017-07-28 (Fri) 07:18:34)
- 5 (2017-08-09 (Wed) 15:46:55)
- 6 (2017-09-04 (Mon) 19:23:09)

Tutorial?

Environment
- Windows environment setting
- Setting up the Ubuntu environment

Environment †

↑

Windows environment setting †

↑

Unity installation †

Select Unity 5.6.1 installer for windows from Unity download web page and proceed to the download then Run the installer and go through the installation according to the procedure.
Next, start Unity, create a Unity account, and sign in.

Click "Create account" on the sign-in login
Register your account (browser registration) then use the registered account and "Sign In"

↑

Download Unity project of SIGVerse_v3 †

Please download the "zip" project
Clone or download」→「Download ZIP」 and extract it in the repository of your choice.

You can clone the repository anywhere in the Windows environment if you are using Git

↑

How to open the Unity project †

Start Unity and click "OPEN".
The folder selection UI will appear select the downloaded project in the previous section ("unity_project" ? "SIGVerseProject") and then click on "Select folder" button.

↑

Setting up the Ubuntu environment †

The following installation requires Ubuntu 14.04.
SIGVerse_v3 is fully connective to ROS.
In order to connect to the ROS components we need to perform some installations.

↑

Installation of ROS indigo †

Follow the following instructions to install ROS.

↑

Installing ROSBridge_suite †

ROSBridge_suite will allow a part of SIGVser to be connected to ROS.
Start the terminal and execute the following command.

$ Sudo apt-get install ros-indigo-rosbridge-server

↑

Installing CMake †

CMake ver.3.2 or higher is is required to compile our project please proceed as follow for the installation.
Start the terminal and execute the following commands.

$ Cd ~ / Downloads 
$ Wget https://cmake.org/files/v3.7/cmake-3.7.2.tar.gz
$ Tar zxvf cmake-3.7.2.tar.gz
$ Cd cmake-3.7.2
$ ./configure
$ Make
$ Sudo make install

↑

Mongo C driver installation †

Mongo C driver is required to compile our project please proceed as follow for the installation.
Start the terminal and execute the following commands.

$ Cd ..
$ Wget https://github.com/mongodb/mongo-c-driver/releases/download/1.4.2/mongo-c-driver-1.4.2.tar.gz
$ Tar zxvf mongo-c-driver-1.4.2.tar.gz
$ Cd mongo-c-driver-1.4.2
$ ./configure
$ Make
$ Sudo make install

↑

Mongo C ++ driver installation †

Mongo C ++ driver is required to compile our project please proceed as follow for the installation.
Start the terminal and execute the following commands.

$ Cd ..
$ Wget https://github.com/mongodb/mongo-cxx-driver/archive/r3.0.3.tar.gz
$ Tar zxvf r3.0.3.tar.gz
$ Cd mongo-cxx-driver-r 3.0.3 / build
$ Cmake - DCMAKE_BUILD_TYPE = Release - DCMAKE_INSTALL_PREFIX = / usr / local - DLIBMONGOC_DIR = / usr / local - DLIBBSON_DIR = / usr / local ..
$ Sudo make EP_mnmlstc_core
$ Make
$ Sudo make install

↑

Setting of sigverse_ros_bridge †

Open a terminal and execute the following commands.
We assume that a catkin workspace has been created according to the ROS tutorial procedure.

$ Cd ~ / catkin_ws / src
$ Git clone https://github.com/SIGVerse/ros_package.git
$ Cd ..
$ Catkin_make

Backup of Installation (No. 2)